|
|
 |
|
These proven horizontal, valved-piston motor designed transfer pumps were created for simplicity and reliability. They are a cost-effective solution for oil distributors who need to supply pumps for customers who purchase bulk oil in tanks or drums. Available as stub pumps, 16-/55-gallon pump or 250-to 275-gallon tank pump.
- Proven horizontal, valved-piston motor design for simplicity and reliability.
- Provides quick dispense, fill or transfer with high-volume output.
- Built-in muffler for quiet operation
- Cost-effective solution for oil distributors who need to supply pumps for customers who purchase bulk oil in tanks or drums.
- Available as stub pump, 16-/55-gallon pump or 250- to 275-gallon tank pump
- Motor's single-stroke action delivers cost effective, high performance
- Provides quick dispense and fill of ATF, oil, gear, lube and other fluid lubricants with the speed of many higher-priced pumps
- Ideal for use with one or two overhead reels in applications such as medium-to-light vehicle service facilities, car dealerships, small contractors, farmers and agriculture equipment dealers
|
 4475 |
 4480 |
 |
Stub pump design provides the versatility to transfer and dispense controlled amounts of lubricant using an oil spigot, control valve or meter. Adaptable for 16- or 55-gal. containers as well as bulk tank or standpipe installations. Delivers 12.5 cu. in. per cycle. Includes air motor 84831, pump tube 84828, suction tube, bung bushing, air coupler and air nipple.
Transfer pump quickly transfers fluids directly from 55-gallon drums. 2" bung bushing adjusts to varied drum lengths. Designed to stall against lubricant pressure. Use built-in air control valve to adjust fluid output flow. |
 |
Neoprene seals resist wear from abrasive fluids. Double-acting diaphragm delivers one full gallon per eight strokes. 8' hose with discharge nozzle. |
 |
Telescoping pick-up tube for 16-through 55-gallon drums with standard 2" bung openings. Bung opening tool built into pump head to open sealed refinery containers. Provides 8.5 fl. oz. per full stroke. For use with non-corrosive fluids such as motor oil, transmission fluid, gear oil, engine coolant and more. |
| |
| 84829 |
stub |
alum/steel/
plastic |
Buna-N |
1"/3/4" |
14 gpm |
1/4" |
NA |
Universal/new oil transfer |
| |
| 82230 |
55-gall. |
alum/steel |
Buna-N |
3/4" - |
20 gpm |
1/4" |
NA |
55-gal drum |
| |
|
 |
Pump material from one container or reservoir to another. Typical applications involve high volume transfer of low to medium viscosity fluids.
| |
| 84080-9 |
55 gallon |
3:1 |
375/26 |
| |
| 84145-9 |
Bulk |
3:1 |
375/26 |
| |
| 82230 |
16 gall or 55 gall |
1:1 |
150/10 |
| |
| 84829 |
16 gall, 55 gall or Bulk |
1:1 |
150/10 |
| |
*Accessories for 82230: 82715-Teflon®Kit; 91172-Hose & Nozzle 2
| |
| 84080-9 |
2.5 / 9.5 |
316 Stainless Steel |
Teflon® |
1/2" NPT |
| |
| 84145-9 |
2.5 / 9.5 |
316 Stainless Steel |
Teflon® |
1/2" NPT |
| |
| 82230 |
22 / 82 |
55-gallon |
Carbon Steel |
3/4" - 11-1/2"
NPT |
| |
| 84829 |
16.5 / 66 |
55-gallon |
Tube-Carbon Outlet Body Valox |
3/4" NPT |
| |
| |
| 84080-9 |
2" bun bushing and 1/4" NPTF return outlet |
| |
| 84145-9 |
Wall mount kit, and suction hose check1 |
| |
| 82230 |
Built-in control valve for throttling air supply to pump to control material output. Operates on pressure as low 20 psi (1.4 bar). Self adjusting bushing |
| |
| 84829 |
Light weight and efficient. The pump wills tall against pressure and can be controlled by a fluid dispensing valve. |
| |
Notes:
- Suction hose or tube (not included) should be compatible with pumped product and not exceed 10'(3m) long nor less than 3/4" (19mm) I.D.
- 91172 transfer pump hose. 8 feet (2.5 m) 3/4" (19mm) I.D. standard hose and curved spout, with inlet threaded 3/4" - 11 - 1/2" A.N. to fit outlet of 82230 pump.
- For transfer systems involving long supply lines, PowerMaster III Stub Pumps are available. Consult Lincoln for your application needs.
|
 |
- Fully hydraulic FlowMaster pump performs in cold or hot weather conditions
- It's compact, fitting inside machine compartments
- Great for use with high-viscosity grease
- Reel and valve for high-pressure operation
| |
| 4500 psi |
22 in3 |
-20° to 150°F |
10:1 |
1/4" NPTF |
| |
| 320 bar |
360 cm3 |
-10°C to 65°C |
10:1 |
1/4" NPTF |
| |
| |
| 36 lbs |
3/8" NPTF |
450 psi |
7 gallons/min. |
200°F |
| |
| 16 kg |
3/8" NPTF |
32 bar |
26.5 liters/min |
93°C |
| |
|
| 86261 |
5-gal pump |
85486 |
271705 |
252725 |
- |
- |
- |
| 86262 |
5-gal pump with 30'
x 1/4" hose, 5' connecting hose |
94532G |
75060 |
740, 81387 |
|
 |
Portable pump, tank and meter package for handling synthetic and conventional motor oils and other specialty fluids. Includes 4475 pump, 28-gallon high-strength polyethylene tank, 10' hose and electronic meter.
- Quick, reliable vehicle service fluid transfer with Lincoln's 4475 single stroke pump.
- Accurate,dependable fluid measurement and dispensing with Lincoln's precise and rugged 952 oval gear electronic meter.
- Services 20 or more cars with the high-capacity 28-gallon tank.
- Easy to maneuver around the shop with baffled tank mounted on large pneumatic wheels.
- Helps protect vehicle finish when working in tight spaces with the strong, yet light-weight polyethylene tank.
- Store the 10' hose and meter safely out of the way on molded brackets.
|
| |
|
|
|
